How to Find the Best Provider of Compressed Air Filters

If you're looking to purchase new compressed air filters for an air compressor in Melbourne, it's important to choose a trusted provider. By doing so, you'll be giving yourself the best chance to benefit from a provider who can cater to the needs of many industries and supply high-quality products.

Here are some tips to help you locate the best provider of compressed air filters:

  • Find a service provider who can cater to all your needs with the right products and services.
  • Browse your local business directory to look for nearby providers. Call each one up to ask questions and obtain quotes.
  • Conduct research on the internet to determine the reputation of a provider. You may be able to read reviews from past clients who have used their services.
  • Make sure they can provide compressed air filters that are capable of removing oil, dirt, water and bacteria.

By taking the steps above, you can ensure the best performance of your air compressor in Melbourne. To learn more, visit www.airenergy.com.au.

Original Source: http://aircompressormelbourne.blogspot.com/2016/08/how-to-find-best-provider-of-compressed-air-filters.html

The Benefits of Using HDPE Pipe for Industrial Purposes

HDPE is an abbreviation of High Density Polyethylene Pipes - a type of piping that has been around for many years and is commonly used in industrial processes. Along with stainless steel pipe fittings, HDPE pipe is a popular choice that boasts numerous benefits:

  • It offers a wide range of user applications, from transporting water from one place to another through to removing hazardous waste.
  • Like stainless steel pipe fittings, HDPE pipe is very durable and can last a long time. The materials used to make it are very tough and can withstand high pressure.
  • HDPE pipe is rust free, which makes it ideal for transporting liquids without corroding.
  • The joint of these pipes are made with the use of heat-fused techniques to prevent leaks.
  • HDPE pipe is lightweight and available in longer lengths than other options.

To discover more benefits of using HDPE pipe for industrial purposes, visit: www.airenergy.com.au

Original Source: http://aircompressormelbourne.blogspot.com/2016/08/the-benefits-of-using-hdpe-pipe-for-industrial-purposes.html

Things to Consider Before Buying Blue Pipe

A pipe is a tubular section or hollow cylinder that's used mainly to carry flowing substances such as liquids, gases, compressed air, powders, and even masses of small solids. Pipes can also be used for structural applications in industrial environments. One such type of pipe that's becoming increasingly popular for various industrial purposes is blue pipe.

If you're considering purchasing blue pipe, we recommend that you keep the following in mind:

First and foremost, consider the quality of the pipe. It should be durable enough to withstand extreme temperatures.

Consider the price of the blue pipe. Don't just go for the cheapest available – try to find a quality option that provides you with the best value for money.

Make sure that the pipe isn't faulty. If a leak occurs that involves compressed air, liquids or other substances, a hazardous situation could arise.

You should only buy blue pipe from a reliable, well-established brand.

For more information, visit www.airenergy.com.au.

Orignal Source: http://aircompressormelbourne.blogspot.com/2016/07/things-to-consider-before-buying-blue.html

The Industrial Benefits of Using Aluminium Pipe Fittings

When it comes to pipe systems that are specially designed to cater to the needs of compressed air, there's no better choice than aluminium pipe fittings. Not only are they strong and durable, but they're also lightweight, making them suitable for a wide range of industrial purposes.

Here are a few more benefits:

They deliver fantastic results and can enhance overall performance.

The process of installation is quick and easy. They do not require any welding, as they are internally coated with polymer that offers superior corrosion protection.

Aluminum is a stronger material than other pipe options such as hdpe pipe, which can be prone to leakage. Aluminum pipe fittings also don't require parts to be threaded, making them a cost-effective option.

They do not corrode, even if polluted air passes through them.

To obtain more information on aluminium pipe fittings, please visit www.airenergy.com.au.

Original Source: http://aircompressormelbourne.blogspot.com/2016/07/the-industrial-benefits-of-using-aluminium-pipe-fittings.html

Tips for Compressed Air Installations

An air compressor is a device that converts power using an electric, diesel or gasoline engine, turning it into potential energy stored in pressurised air, such as compressed air. The air compressor forces more and more air into a storage tank, increasing the pressure. When the tank pressure reaches its upper limit, the air compressor shuts off. The compressed air can then be used for a variety of applications and is usually held in the tank until called into use.

You can find many suppliers of air compressors in Melbourne. However, if you're planning for a compressed air installation, it's important to keep the following tips in mind:

Always choose a supplier who has a good reputation for producing high-quality products.

Ensure you select an efficient and reliable installer, as bad installations can lead to unnecessary inconvenience later on.

To guarantee effective installation, choose a trusted company.

These tips can be also applied for the installation of stainless steel pipe fittings. To learn more, or to obtain more details, visit http://www.airenergy.com.au/.

Things to Keep in Mind When Buying Compressed Fittings

Compressed fittings are used to join two tubes or thin-walled pipes together. Used extensively for hot and cold water faucets, toilet stop valves, and more, compression fittings are well suited to applications where valves are located in confined spaces, as well as where copper pipe would be difficult to solder without creating a fire hazard.

There are many companies who provide press fittings for air compressors, including Atlas Copco compressors. If you're looking for compressed fittings, then you should keep the following points in mind:

Make your decision only after conducting thorough research and analysis to ensure the fittings perfectly suit your needs and requirements.

Choose options that are convenient to use and handle.

Check that all press fittings are suitable for your specific compressor.

To learn more about press fittings and compressed fittings, visit http://www.airenergy.com.au/

Things You Did Not Know About Stainless Steel Pipes

I am sure everyone has heard about stainless steel pipes and its uses, but not everyone knows how exactly these pipes are beneficial. Well this post explores several benefits of using stainless steel pipes. Take a look to know more.

  • One of the well known yet obvious advantages of using stainless steel is that it is resistance to corrosion. Yes stainless pipes and fittings have this ability to hold up against corrosion; hence they are best for corrosive environments. You will find several leading stainless steel pipe suppliers around that will work best for you. 

  • Apart from resistance, strength to weight is another advantage of using stainless steel pipes. Which means your pipes can be made thinner that indirectly reduces the material costs and makes installation process much easier.

  • Did you know that products like compressed air system design, stainless steel pipes offer a variety when we are talking about the aesthetics? Yes they being widely available in several finishes can give a decent look to your space.
Visit: http://www.airenergy.com.au

How to Reduce the Costs of Your Atlas Copco Compressor?


Might you want to decrease electrical expenses identified with your packed air framework? More than likely - you can. Begin by deciding your yearly packed air electrical expenses by utilizing this recipe:

Brake Horse Power X 0.746 X Annual Hours of Operation X KWH (Kilowatt-Hour) Cost (partitioned by) Motor Efficiency.

In the event that you are utilizing petroleum based greases, you could experience up to an 8% vitality investment funds by changing to Compressor Synthetic Lubricants. Furthermore broaden gear life and save money on oil changes and transfer cost.

Reduce plant weight 2 pounds at once, then test keep running for least 24 hours. In the event that any hardware has issues...then build weight 2 pounds until running easily once more.

For each 2 pound weight diminishment -you spare 1% of the electrical expense to run the compressed air lines.

Check Differential Pressure on filters compressed air Begin at the compressor bureau channel then check the compressor bay channel.

Note: A filthy bay channel can cost you 1% to 3 % in extra electrical expenses. Why? Since diminished wind stream to the compressor delta valve builds the pressure proportions bringing about more run time.

Next change the control air channel component. This is regularly over looked, yet essential channel where the controls get their air signal. A weight drop here causes the controls to get the lower weight sign stacking the atlas copco compressor more and utilizing more power.